Posts Tagged ‘tools’

Screwdriver sets

Posted in Buying Guides, Hand Tool Reviews on January 11th, 2012 by Julian Cassell – Be the first to comment

Screwdriver sets are still essential parts of all DIY toolkits despite the fact that cordless drills now carry out most of the fixing requirements in our homes. In the following guide I’ll give you a few examples of why screwdrivers will always be needed, as well as some details about screwdriver designs and the types available. As is normally the case with any tool, you really don’t need every option to deal with the majority of DIY tasks and with this thought in mind, I’ll provide you with my choice for the best screwdriver set on the market.

When do you still need screwdrivers?

Basically, there are still times when a screwdriver makes more sense than a cordless drill, such as for the fiddly small screws or when you need really precise, accurate, and essentially non-slip control when driving in a screw. In the latter case, I’m thinking specifically of jobs such as fitting or changing a door handle; I’ve seen so many shiny new brass door handles that have deep scratches radiating out from the screwheads because someone has tried using a cordless drill driver to fix the screws in place and the screwdriver bit has slipped and gouged across the fitting plate. Always use hand held screwdrivers for this type of work.

Fitting kitchen hinge with screwdriver

Sometimes you’ve just got to use a hand held screwdriver, rather than a cordless drill, as it gives you much greater control when inserting a screw.

Another point is simply that trying to drive in traditional slothead screws with a cordless drill driver is certainly possible, but never really advisable, as they just slip too easily. Cordless drivers are really designed for use with crosshead screws (Posidriv and Phillips) or other designs that have more of a ‘socket’ fit for the screwhead such as Torx and Robertson screws (one for Canadian readers!).

Linked to the above points is simply the fact that the brute force of a cordless drill can sometimes work against you, and damage fixings, and fixing holes. For example, if you don’t have precise trigger control with your cordless drill when screwing hinges into a kitchen unit, you can end up damaging the screw or even the fixing hole. Standard screwdrivers just give you a bit more control in cases like this.

Screwdriver design

There are three parts to a screwdriver design and the eseential points for what you need to look out for are outlined below:-

  1. Handle design is pretty essential and so steer clear of anything very shiny or smooth as it simply doesn’t provide a good enough grip. Modern screwdriver designs tend to use softer handles made of materials that provide a better grip.
  2. Shaft design is not the biggest concern when choosing as most are either round or square in cross-section. The square ones allow you to grip them with an adjustable spanner or pliers in order to create greater torque, but to be honest that’s more ‘Engineering workshop’ than ‘DIY’. Shafts that are round in cross-section are more common, and that is all you need.
  3. Tip design and most importantly what the tip is made of are the most essential things to look at when buying a screwdriver set. If a screwdriver has a flared tip i.e. the tip is wider than the shaft, then you will get greater torque, but there is a limitation here as flared tip screwdrivers are not much help if the screwhead needs to end up below the surface of what you are screwing into. For example, fine for brass handles where the screwhead is above surface level, but useless for say, taking apart the kids’ toys in a case where the screwhead is recessed well below surface level. For this reason, I always think you need parallel (non-flared) tip options in your screwdriver set, as they are much more multipurpose. Also, and vitally, the tip material needs to be resistant to corrosion and made from hardened steel. In general, avoid anything that is shiny, and a sparkly silver colour from handle to tip – these should only really be used as toys inside Christmas crackers!

Screwdriver set sizes

Of course, screwdrivers can be bought separately, but it makes much more sense to buy them in sets as you’ll get much better value for money. You can buy screwdriver sets in a large range of sizes, but without doubt the six to ten piece ranges are all you really need for dealing with 95% of household requirements. This gives you small, medium, and large sized screwdrivers with heads/tips in at least two designs – normally you’ll get three slothead screwdrivers, and a further selection of crosshead designs, again in different sizes.

Best screwdriver set choice

My favourite option on the market, is the Stanley Fatmax 9 piece screwdriver set as firstly it provides what I think is the most useful selection of sizes and tips. Furthermore, the handle design used with the Fatmax set is incredibly comfortable and provides great grip, and the chrome vanadium construction of the actual screwdriver bar makes them exceptionally strong from handle to tip. They even have colour coded bits on their handles according to tip type, which makes it easy to pick out the right screwdriver when rooting around in your toolbox.

As discussed above, you really don’t need every size of screwdriver in your set, and so I’ve provided deals for what I feel is the optimum set size of around 9-10 screwdrivers. You can go for 6 or 7 piece sets, but for the small difference in cost, I’d always be tempted to go for the slightly larger set.

You’ll find the largest range of Fatmax screwdriver sets on Amazon. Other retailers where you can find them include Screwfix and Tooled-Up.

Share

Buying a hammer

Posted in Buying Guides, Hand Tool Reviews on February 15th, 2011 by Julian Cassell – Be the first to comment

Buying a hammer should really be a once in a lifetime event, because if you buy the right one, it will definitely outlast you, and probably your children. The right hammer will never break, and the only reason you should buy more than one hammer in your life is because you keep losing them. What I think is the best all-round hammer for both pros and DIY is detailed at the bottom of the page, but firstly, a little bit more information about hammer types, design, and what to look out for when buying a hammer. read more »

Share

Household toolkit

Posted in 'How-to' Guides, Diy Basics on August 9th, 2010 by Julian Cassell – Be the first to comment

It is best to build up a household toolkit according to need, but having a small collection of basic handtools provides a good foundation for beginners or professionals alike. The quality of a tool is often reflected in its price and buying cheap tools can be a false economy, as they may not be as sturdy or long-lasting as more expensive ones. Cheaper tools can be useful for light work, or if you only use them infrequently. Below are a selection of tools that will allow you to do many DIY jobs around the home. read more »

Share