Flooring

Tools you need for laying a laminate floor

Posted in 'How-to' Guides, Flooring on December 29th, 2012 by Julian Cassell – Be the first to comment

The tools you need for laying a laminate floor include many of the items you’ll find in your household toolkit, such as a hammer, saw, and tape measure. Some power tools are also handy such as a jigsaw, and mitre saw, but it would normally be possible to lay a laminate floor without them. However, there are three other more specialist tools that you won’t find in your toolbox, which are definitely essential pieces of equipment if you are intending on laying a laminate floor. read more »

Share

Where to start tiling a floor

Posted in 'How-to' Guides, Flooring on October 15th, 2012 by Julian Cassell – 1 Comment

When deciding where to start tiling a floor, you can employ a number of techniques that will help in your decision-making process. The aim is to produce a tile layout that provides the most balanced effect, in terms of cut tiles around the edge of the room, as well as trying to establish any areas where you ideally need to centralise the design, such as at a door entrance, for example. In reality, your tile layout will normally have compromises read more »

Share

Best wood floor

Posted in 'How-to' Guides, Flooring on June 6th, 2012 by Julian Cassell – 2 Comments

Choosing the best wood floor for your home can be a tricky process unless you know precisely what options are available to you. This process is further complicated by manufacturers using all sorts of differing terminology that can hinder, rather than help, the consumer know exactly what they are getting. In this guide I’ll try to simplify the process, explain some of the buzz words, and therefore allow you to make an informed decision on buying the best wood floor for your needs. read more »

Share

Laying hard tile floors

Posted in 'How-to' Guides, Flooring on November 12th, 2010 by Julian Cassell – Be the first to comment

You can tile directly onto concrete floors if they are sound, dry, and level, or you can use a self-levelling compound to improve the surface. Floorboards should be covered with 12-18mm ply to provide a sound, rigid surface for tiling. For more information on laying a suitable subfloor see the related posts at the bottom of this page. read more »

Share

Laying carpet tiles

Posted in 'How-to' Guides, Flooring on November 11th, 2010 by Julian Cassell – 1 Comment

Most carpet tiles don’t require adhesive and are laid dry. You can use double-sided tape in the first row, but after that, unless the manufacturer specifies, lay them dry. Some tiles even have their own adhesive tabs to keep them in place. This laying system makes it very easy to repair any damage as you simply lift out a tile and replace it with a new one. Tiles can be laid on concrete or wooden floors as long as they are flat, sound, level, clean and dry. read more »

Share